Installation method of differential pressure transmitter
The installation method of differential pressure transmitter may vary depending on the model and application scenario, but generally speaking, its installation method mainly includes the following steps:
1、 Preparation work
Select installation location:
Usually, it is chosen between the inlet and outlet of the hydraulic pipeline oil filter to ensure that the installation position is close enough to the oil filter so that the sensor can accurately monitor the status of the filter element.
Prepare installation tools:
Prepare the necessary tools such as wrenches, screwdrivers, sealing materials, etc. according to the model and installation requirements of the differential pressure transmitter.
2、 Installation steps
Determine installation direction:
According to the installation requirements of the differential pressure transmitter, the installation direction should be determined to be consistent with the flow direction of the hydraulic pipeline.
Clean installation area:
Clean the surface of the pipeline around the installation location to ensure that there are no debris or dirt affecting the installation.
Install fixed bracket:
According to the installation hole distance provided by the differential pressure transmitter, fix the fixed bracket in the installation position. Ensure that the bracket is securely installed and will not loosen due to vibration.
Connecting hydraulic pipelines:
Connect the inlet and outlet of the hydraulic pipeline to the installation position of the differential pressure transmitter. Ensure that the connection is tight and there are no leaks.
Install differential pressure transmitter:
Install the differential pressure transmitter on the pre installed fixed bracket and fix it according to the requirements to ensure a stable installation.
Connect power and signal lines:
According to the power and signal requirements of the differential pressure transmitter, connect it to the power line and control system or recording instrument. Ensure that the power line is stable and meets safety standards, and that the signal line is connected correctly and without errors.
3、 Debugging and testing
Debugging:
After installation, carry out debugging work to ensure that the differential pressure transmitter can work properly.
Testing:
Conduct testing to verify whether the differential pressure transmitter can accurately monitor the status of the filter element in the hydraulic system and issue the correct alarm signal.
4、 Record and maintain
Record installation information:
Record the installation location, connection method, power information, and debugging test results of the differential pressure transmitter for future maintenance and management needs.
Regular inspection and maintenance:
Regularly inspect and maintain the differential pressure transmitter to ensure that it is in good working condition.
It should be noted that different models of differential pressure transmitters may have different installation methods. Therefore, in the actual installation process, it is necessary to carefully read the product manual or consult the manufacturer's technical support personnel to ensure correct, safe, and stable installation.